gardengenerator

Garden tools

Print the bits the garden needs.

Parts for the greenhouse and the veg patch. Pick a generator, set your size, check it in 3D, download the STL.

See the generators
  • Greenhouse gutter outlet
  • Seed spacer, 3 to 30 cm
  • PETG or ASA for outdoors
  • Fits a 220 mm bed
A 3D printed greenhouse gutter end outlet next to a seed spacer opened out to an even gap.

Choose a generator

Each one opens a workbench with a live 3D view and an STL download.

A greenhouse gutter end outlet with a bent spout and a leaf grate.

Greenhouse outlet

The stop end with a downpipe spout for aluminium greenhouse gutters. Pushes into the gutter end.

greenhouseleaf grate
Make an outlet
A seed spacer opened out, with orange caps on its marks.

Seed spacer

An expanding ruler for sowing. Stretch it to the gap, lock it, and every mark sits the same distance apart.

3 to 30 cmany number of marks
Make a seed spacer
In progress
next up

More garden tools

Plant labels, cane joints and raised bed corners are next.

labelscane joints
Coming soon

How it works

  1. step 1

    Pick a generator

    Start from a ready-made size, or measure what you have. The 3D view updates as you go.

  2. step 2

    Print the fit test

    Each generator has a short test piece, so you can check the fit before printing the whole part.

  3. step 3

    Download and print

    Get a zip with the STLs and a note of your settings. Print notes say which way up and what supports.

The generator runs OpenSCAD in your browser, so nothing is uploaded. It is a parametric model: a size change is a setting, not a new design.

Questions

Will it fit my greenhouse?

It fits the common UK aluminium greenhouse gutter out of the box. For other makes, measure the outside of your gutter and adjust the four sizes.

Can I connect a hose or water butt?

Yes. Set the spout's outside diameter to suit your hose or downpipe connector.

How does it keep the gaps equal?

It is a lazy-tongs linkage, like an expanding coat rack. However far you stretch it, the centre bolts stay the same distance apart.

What gaps can it do?

The standard size goes from 3 to 10 cm using every mark. Use every other mark for 6 to 20 cm, or every third for 9 to 30 cm. The scale shows all three.

What bolts do I need?

M4 bolts and nuts: one per pivot. The workbench lists the lengths and how many. Nyloc nuts on the outer pivots keep them snug but free to turn.

What filament should I use?

PETG or ASA. Both cope with sun, rain and frost. PLA softens in summer sun, so avoid it for anything left outside.

What size printer do I need?

Everything is sized for a 220 mm bed, like a Creality Ender V3. The greenhouse outlet is small. The seed spacer up to a 15 cm gap fits; the 20 cm size prints corner to corner.

Is it free? Do I need to install anything?

It is free and runs in your browser. The generator runs OpenSCAD locally, so nothing is uploaded and there is nothing to install.

Built by Will

Hi, I'm Will. I make these for jobs around my own house, garden and allotment. Every part is sized to print on a 220mm bed, like a Creality Ender V3.